News & Events

Home/News & Events
News & Events2020-03-30T13:58:58+08:00

How to improve the light transmittance of clear plastic profiles through the raw material process?

Due to the high light transmittance of transparent clear plastic profiles, the surface quality of transparent profile products is very strict, and there should be no defects such as [...]

八月 24th, 2020|Categories: Company News|

Transparent PVC profiles Manufactuer-H.D.Plastics

Last time we talked about the selection of raw materials and precautions to improve the lighting transmittance of transparent PVC Profiles, this time I will talk about what issues should [...]

八月 23rd, 2020|Categories: Industry News|Tags: , |

Ways to improve the scratch and wear resistance of plastic channel- H.D.Plastics

1. Choose the right basic resin for extruded plastic channel : Ultra-high molecular weight polyethylene (UHMWPE) is usually one of the most wear-resistant plastic materials. Choosing UHMWPE can easily improve [...]

八月 16th, 2020|Categories: Industry News|

How to control pressure in two-color plastic co-extrusion process?-H.D.Plastics

The two most important processes for two-color plastic co-extrusion are filling and pressure holding. How to control the pressure in the two-color injection molding process is our years of [...]

八月 16th, 2020|Categories: Industry News|Tags: |

Solutions to uneven color caused by molding conditions of custom plastic extrusion parts

Uneven color is often resulted due to different phenomena with different causes. If the color near the feed inlet is uneven, it is generally caused by the uneven distribution [...]

八月 16th, 2020|Categories: Industry News|
Load More Posts